|
Motorize
Your Antenna
Request pricing
DiSEqC 1.2
MOTORIZED H to H Mount
Yes, it fits Winegard 76cm dishes
Notice:
We sell and service only the SG2100 with our DMS International labels.
If you have bought one of the copies we cannot service it for you and we
do not pay the return shipping. Please check your product before returning
it for service. Failure rate of the copy motors is very high. |
|
| |
|
SG2100 -
Still the best buy in DiSEqC motors.
Note:
If your motor and box
does not look like the picture below, it's not the original SG2100
motor. The original SG2100 is sold and serviced by DMS
International ONLY. Don't be fooled by the knock-off motors
using the SG2100 model number. |
|
|
|
The
original SG2100..... Still the BEST!!!
Private label available
Parts that come with the SG2100
Check for your parts
Request pricing |
|
Click to enlarge |
|
50mm Replacement Tube
Do you have a larger dish that requires a larger tube for mounting??
Now the 50mm Replacement Tube is available from your
DMS International Reseller. 50mm Replacement Tube is a direct
replacement for your existing tube.
Contact your DMS International Reseller for more information. |
|
|
FEATURES:
 | Fits all popular
dish with 42mm tube, including Winegard |
| Special Design for any Receiver with DiSEqC 1.2 |
| Only One Coaxial Cable Control |
| Go To X Function |
| High Efficiency |
| Compact Structure |
| Ultra Low Noise |
| Adjustable Hardware Limits |
| Easy Installation with LED Indicator |
| Manual EAST / WEST button |
| For Dish up to 1.2M |
|
|
Specification: |
|
Model |
SG2100 |
|
Antenna Diameter |
1.2M Max.
(33 lbs / 15 KG) |
|
Azimuth Angle |
70˚EAST ~ 70˚WEST ( 140˚ ) Adjustable |
|
Elevation Angle |
25˚~75˚ |
|
Input / Output Voltage |
13 / 18 VDC |
|
Power Consumption |
50 mA (Standby
mode)
200 mA (Normal)
350 mA (Max.) |
|
Rotation Speed |
1.9˚ / sec ( at 13V) ; 2.5 ˚/ sec ( at 18V) |
|
Satellite Positions |
60 |
|
Connector |
F Type |
|
Command Protocol |
DiSEqC 1.2 |
|
Resynchronize Function |
YES |
|
Goto Position 0 Function |
YES |
|
Goto X Function |
YES |
|
Positioning Sensor |
High Resolution Hall Effect Sensor |
|
EAST / WEST Limit |
Adjustable Hardware and Programmable Software |
|
Manual Button |
EAST / WEST |
|
Indicating LED |
YES
|
color |
status |
indication |
|
Green |
On |
Power On; Standby Mode |
|
Orange |
Blink |
Receiving DiSEqC 1.2 Commands/ Reset Mode |
|
Orange |
On |
Error Message: Over Current / Hardware Limit |
|
|
Tube size for antenna |
55x160mm |
|
Stand size |
35~65mm |
Repair Parts |
| SHIPPING
INFORMATION: |
|
Model |
PCs/Carton
|
G.W./Carton
|
Meas./Carton
|
PCs/20FT |
PCs/40FT |
|
SG2100 |
6 |
19.40 KGs |
1.67' |
3500 |
7000 |
|
|
Parts that come with the SG2100 |
Here's how it mounts to HOTDISH75 or Winegard DS2076
Parts that come with the SG2100 |
Setting the declination on a
Winegard DS2076.
Calculate declination as instructed in the manual.
Use the leading edge of the inside bracket that's marked in red.
 |
|
View, print, download the SG2100 Manual in
English or in
German
Or see our new "Easy Install" SG2100 manual
Note: Always use and follow the instruction manual that
comes with your SG2100
Reset Instructions for the new
SG2100 with 2 control buttons.
- Turn off your receiver to stop the power to
the SG2100.
- Press and hold BOTH control buttons on the
motor.
- Turn on your receiver to apply power to the
motor. At this time the indicator light should alternate
between green and red. Continue to hold the two control
buttons until the indicator light shows a steady green. The
indicator light will normally flash from green to red about 15
times.
- Your motor is now reset.
Tech Tip
Installers, carry a push-on F connector with
you, the kind that slips on and off. This is a handy way to
stop and re-start the power to the SG2100 when you want to do a
reset.
Push on F connector
|
Contact
your Authorized DMS International Reseller Today. |
| |
|
